We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If you’re driving a 2004 Grand Am, then you’ll probably want to know how to change your brake pads. This can be a relatively easy process, but it’s important to do it correctly in order to maintain the safety of your vehicle.
If you’re not comfortable with changing your brake pads, then you can take your car to a mechanic and they can do it for you. However, it’s still a good idea to know how the process works so that you can be sure the job is being done properly.
How do you take the caliper off a 2004 Pontiac Grand Am?
First, you’ll need to jack up the car and remove the wheel. Once the wheel is off, you’ll see the brake caliper mounted to the brake rotor. There are two bolts holding the caliper in place, one at the top and one at the bottom. Remove these bolts and then pull the caliper off the rotor. Be careful not to damage the brake line when removing the caliper. Once the caliper is off, you can remove the old brake pads and install new ones. Then, simply reverse the process to install the caliper back onto the rotor.
How do I change my brake pads?
If your vehicle has disc brakes, the brake pads are what provide the friction to stop the vehicle. The pads are mounted in brake calipers, with one pad on each side of the disc. When the brake pedal is applied, hydraulic fluid is sent to the calipers, which pushes the pads against the disc, slowing the wheel.
How much are brake pads for a Pontiac?
The cost of brake pads for a Pontiac will vary depending on the model and year of the vehicle as well as the type of brake pads needed. Generally, brake pads for a Pontiac will range in cost from $30 to $100.
How often should you replace brake pads on a Corolla?
According to Toyota, brake pads should be replaced every 50,000 miles.
How do you change the brakes on a 2004 Pontiac Grand Prix?
To change the brakes on a 2004 Pontiac Grand Prix, you will need to remove the old brake pads and discs, and then install the new ones in their place.
Can I change brake pads myself?
It is possible to change brake pads yourself, but it is not recommended unless you have experience with auto maintenance. If you are not comfortable working on your car, it is best to take it to a mechanic.
What tools do I need to change my brake pads?
To change your brake pads, you need: a jack, a jack stand, a lug wrench, a c-clamp, a brake pad spreader, brake pads, and brake lubricant.
Do you need to bleed brakes when changing pads?
It is not necessary to bleed the brakes when changing the brake pads. However, if the brake pads are worn down to the point where the metal backing plate is exposed, the backing plate can contact the brake rotor and cause damage. In this case, it is necessary to bleed the brakes to remove any air from the brake lines and prevent damage to the brake system.
How much are rotors for a Pontiac G6?
Depending on the year of the Pontiac G6, the rotors can range in price from $30 to $70. The 2008 Pontiac G6 has the most expensive rotors at $70, while the 2006 Pontiac G6 has the cheapest rotors at $30.
How much are brakes for a 2006 Pontiac G6?
The price of brakes for a 2006 Pontiac G6 can vary depending on a few factors. These factors can include the make and model of the vehicle, the year it was manufactured, the size of the vehicle, and the specific brake system that is needed. Generally, the price for a set of brakes can range anywhere from $50 to $200.
How do you change the brakes on a Pontiac G6?
To change the brakes on a Pontiac G6, you will need to:
What happens if you replace brake pads without turning the rotors?
If you replace brake pads without turning the rotors, the new brake pads will not make full contact with the rotors, which will prevent the brakes from working properly. Additionally, the old brake pads may still be stuck to the rotors, which can cause the brakes to squeal or grind when they are applied.
Should I replace brake pads and rotors at the same time?
It is typically recommended that you replace your brake pads and rotors at the same time. This is because your rotors can become worn down over time from the contact with your brake pads, and replacing just the pads may not provide optimal braking power. Additionally, if your rotors are too worn, they may need to be replaced anyway, so it may be more cost-effective to do both at the same time.
Is it necessary to replace rotors when changing pads?
In general, it is not necessary to replace rotors when changing pads. However, if the rotors are excessively worn or damaged, they may need to be replaced.
How do you bleed the brakes on a 2008 Pontiac Grand Prix?
There are a few different ways that you can bleed the brakes on a 2008 Pontiac Grand Prix. One way is to use a brake bleeding kit. This kit will usually come with a container to catch the brake fluid, a length of tubing, and a bleeder screw. You will need to connect the tubing to the bleeder screw and then open the bleeder screw until you see fluid coming out. Make sure to keep the container below the bleeder screw to catch the fluid. Once you see fluid coming out, close the bleeder screw and move on to the next one. Repeat this process until all of the brakes have been bled. Another way to bleed the brakes is to use a power bleeder. This is a device that attaches to the brake fluid reservoir and uses a pump to force the fluid through the system. This can be a quicker and easier way to bleed the brakes, but it can be more expensive.
How much is a brake pad change at Walmart?
The cost of a brake pad change at Walmart will vary depending on the make and model of your vehicle. However, on average, you can expect to pay between $60 and $120 for the parts and labor.
How long does it take to change brake pads?
It takes anywhere from 20 minutes to an hour to change brake pads, depending on the make and model of the vehicle.
How much does it cost to change brake pads?
The cost of changing brake pads depends on the type of vehicle and the number of brake pads that need to be replaced. On average, it costs between $100 and $200 to change brake pads.
How do you check brake pads without removing wheels?
There are a few ways to check your brake pads without removing your wheels. One way is to look at your brake pads through the spaces between your wheel’s spokes. If you can see more than 1/4 inch of pad, then your pads are still good. Another way to check your brake pads is to listen for a squealing noise when you apply your brakes. This squealing noise is an indicator that your brake pads need to be replaced.
Do you need jack stands to change brakes?
No, you do not need jack stands to change brakes. You can safely change your brakes without using jack stands, provided you have a safe place to work and the proper tools.