We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If your brake pads are worn down and your rotors are warped, it’s time to change them. Here’s how to do it for a 2002 Honda Odyssey.
First, you’ll need to remove the caliper. You can do this by unbolting it from the caliper bracket. Next, you’ll need to remove the brake pads. To do this, simply pry them out of the caliper. Finally, you’ll need to remove the rotor. This is done by removing the two bolts that hold it in place.
Can I change my own brake pads and rotors?
Yes, you can change your own brake pads and rotors. You will need a few tools, including a socket wrench, to remove the old brake pads and rotors. You will also need to purchase new brake pads and rotors. Once you have everything you need, follow these steps:
How much should it cost to replace brake pads and rotors Honda?
To replace brake pads and rotors on a Honda, it should cost around $200-$300.
How long should rotors last on a Honda Odyssey?
This answer was taken from a Honda forum:
How do you change brake pads and rotors top 10 brake jobs?
1. Jack up the car and support it with jack stands.
2. Remove the wheel.
3. Use a C-clamp to compress the brake caliper piston.
4. Remove the brake caliper.
5. Remove the old brake pads and rotor.
6. Install the new brake pads and rotor.
7. Reinstall the brake caliper.
8. Pump the brake pedal to seat the pads.
9. Lower the car.
10. Repeat for the other wheels.
What tools are needed to change brakes and rotors?
The tools needed to change brakes and rotors are: a wrench, a socket set, a screwdriver, a hammer, and a chisel.
Do you need to bleed brakes when changing pads?
It is not necessary to bleed the brakes when changing the brake pads. However, if the brake pads are worn down to the point where the metal backing plate is exposed, the backing plate can contact the brake rotor and cause damage. In this case, it is necessary to bleed the brakes to remove any air from the brake lines and prevent damage to the brake system.
How much does Honda charge for a brake change?
Honda charges around $200 for a brake change. This includes the cost of the parts and the labor.
What does Honda brake service include?
Honda brake service typically includes an inspection of the brake system, a replacement of the brake pads or shoes, a resurfacing of the brake rotors or drums, and a replacement of the brake fluid.
How often do you replace brake rotors?
The frequency with which you replace your brake rotors depends on a few factors, including your driving habits and the environment in which you live and drive. If you live in a wet climate or do a lot of stop-and-go driving, you may need to replace your brake rotors more frequently than someone who lives in a dry climate and drives mostly on highways. Additionally, if you frequently haul heavy loads or tow a trailer, you may also need to replace your brake rotors more frequently than the average driver.
How often do front brake pads need to be replaced?
front brake pads need to be replaced every 30,000 to 50,000 miles.
How do you clean rotors before installing?
There are a few ways to clean rotors before installing. One is to use a brake parts cleaner and a clean cloth to wipe away any dirt or debris. Another is to use a power washer. You can also sand the rotors with sandpaper to remove any rust or corrosion.
Do you need to remove brake fluid cap when changing brake pads?
No, you do not need to remove the brake fluid cap when changing brake pads.
How do you replace brake rotors and calipers?
To replace your brake rotors and calipers, you’ll need to first remove the old parts. To do this, you’ll need to remove the wheel, then the brake caliper, and finally the brake rotor. Once the old parts are removed, you can then install the new brake rotors and calipers. To do this, you’ll need to first install the new brake rotor, and then the new brake caliper. Once the new parts are installed, you can then reinstall the wheel, and you’re done!
Do you need a caliper tool to change brakes?
No, a caliper tool is not needed to change brakes.
Do you need special tools to replace brake pads?
No, you do not need any special tools to replace brake pads. You will need a wrench to remove the old brake pads and a screwdriver to remove the retaining clip. You may also need a hammer to tap the new brake pads into place.
Do you need jack stands to change brakes?
No, you do not need jack stands to change brakes. You can safely change your brakes without using jack stands, provided you have a safe place to work and the proper tools.
What happens if you don’t bleed your brakes after changing them?
If you don’t bleed your brakes after changing them, the brakes may feel spongy when you first depress the pedal. Additionally, you may not have full braking power, which could be dangerous.
Do you pump brakes after adding brake fluid?
No, you should not pump the brakes after adding brake fluid.
Will brakes eventually bleed themselves?
No, they will not. Brakes need to be bled periodically to remove air from the lines. Over time, air can enter the lines and cause the brakes to feel spongy.
When should I replace my Honda brake pads?
It is typically recommended to replace your Honda brake pads every 30,000 miles. However, this can vary depending on your driving habits and the type of brake pads you have. For example, if you do a lot of stop-and-go driving or live in a hilly area, you may need to replace your brake pads more frequently. If you have ceramic brake pads, they may last longer than organic brake pads. Ultimately, it is best to consult your Honda owner’s manual or a certified Honda mechanic to get an accurate estimate for when your specific vehicle’s brake pads should be replaced.