We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If you’re like most people, you probably don’t think about your brakes until there’s a problem. But keeping your brakes in good condition is important for both your safety and the longevity of your car. In this blog post, we’ll show you how to change the brake pads on a 2002 Hyundai Elantra.
The process is actually quite simple and only takes a few minutes to complete. You’ll need a few tools, including a socket wrench and a jack, but other than that, it’s a pretty straightforward process.
How do I change my brake pads myself?
Assuming you would like a comprehensive answer on how to change your brake pads:
Does a Hyundai Elantra have rear brakes?
Yes, the Hyundai Elantra has rear brakes.
How much does it cost to replace brake pads Hyundai?
It can cost anywhere from $50 to $200+ to replace brake pads on a Hyundai, depending on the model of Hyundai and where you have the work done.
How often should brakes be replaced Hyundai Elantra?
The Hyundai Elantra has a maintenance schedule of every 7,500 miles or 12 months, whichever comes first. This includes a brake inspection.
Do you need to bleed brakes when changing pads?
It is not necessary to bleed the brakes when changing the brake pads. However, if the brake pads are worn down to the point where the metal backing plate is exposed, the backing plate can contact the brake rotor and cause damage. In this case, it is necessary to bleed the brakes to remove any air from the brake lines and prevent damage to the brake system.
What tools do I need to change my brake pads?
To change your brake pads, you need: a jack, a jack stand, a lug wrench, a c-clamp, a brake pad spreader, brake pads, and brake lubricant.
How do you change rear brake pads on a Hyundai?
If your Hyundai has rear disc brakes, the process for changing the brake pads is similar to changing the front brake pads. You will need a jack and jack stands to support the vehicle, as well as a lugnut wrench and a crescent wrench. You will also need to remove the wheels to access the brake calipers.
How do you change brake pads on a Hyundai?
The process for changing brake pads on a Hyundai will vary depending on the specific model and year of the vehicle. However, in general, the process will involve removing the caliper, the brake pad retaining clip, and the old brake pads. The new brake pads will then be installed in the reverse order. For more specific instructions, it is recommended to consult the Hyundai owner’s manual or a professional mechanic.
How long do Hyundai Elantra brake pads last?
Brake pads typically last between 20,000 and 40,000 miles, but this can vary depending on driving habits and conditions.
What does Hyundai brake service include?
There are several services that might be included in Hyundai brake service. These can include, but are not limited to: replacing brake pads, resurfacing brake rotors, replacing brake fluid, and inspecting brake lines and hoses.
How long does it usually take to get brakes fixed?
The amount of time it takes to fix brakes can vary depending on the severity of the damage and the make and model of the vehicle. However, on average, it should take about an hour to fix brakes.
How much should it cost to replace brake pads and rotors?
The cost of replacing brake pads and rotors depends on the make and model of the vehicle, as well as the quality of the parts. Generally, brake pads will cost between $30 and $100 per set, while rotors will cost between $25 and $50 each.
Does a brake job include rotors?
A brake job usually includes replacing the brake pads and either resurfacing or replacing the rotors.
How do you know when your brake rotor is bad?
Brake rotors typically last between 30,000 and 70,000 miles, but this can vary depending on driving habits. The most common sign that a brake rotor is going bad is pulsing or vibration when the brakes are applied. This is usually caused by the rotor being warped or out of true. Other signs that a brake rotor is going bad are scoring or grooves on the surface of the rotor, or cracks in the surface. If the rotor is excessively worn, it will need to be replaced.
Can brake pads last 100000 miles?
There is no definitive answer to this question as it largely depends on a number of factors, such as the quality of the brake pads, the driving habits of the individual, and the type of vehicle being driven. However, many experts believe that brake pads can indeed last for 100,000 miles or more if they are properly maintained and used correctly.
What happens if you don’t bleed your brakes after changing them?
If you don’t bleed your brakes after changing them, the brakes may feel spongy when you first depress the pedal. Additionally, you may not have full braking power, which could be dangerous.
Will brakes eventually bleed themselves?
No, they will not. Brakes need to be bled periodically to remove air from the lines. Over time, air can enter the lines and cause the brakes to feel spongy.
Do you have to flush brake fluid when changing pads?
The most definitive answer comes from the brake fluid manufacturer. Always consult your vehicle’s owner’s manual and the brake fluid manufacturer’s recommendations. That said, the general rule of thumb is to always flush the brake fluid when changing the brake pads.
Is it hard to change brake pads and rotors?
The answer to this question depends on the level of automotive knowledge and experience that the person has. For someone who is familiar with working on cars, changing brake pads and rotors is not a difficult task. However, for someone who is not familiar with automotive maintenance, changing brake pads and rotors can be a challenging and potentially dangerous task. It is always best to consult with a qualified automotive technician or mechanic before attempting to perform any maintenance or repairs on a car.
How do you check brake pads without removing wheels?
There are a few ways to check your brake pads without removing your wheels. One way is to look at your brake pads through the spaces between your wheel’s spokes. If you can see more than 1/4 inch of pad, then your pads are still good. Another way to check your brake pads is to listen for a squealing noise when you apply your brakes. This squealing noise is an indicator that your brake pads need to be replaced.