We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If your rear brakes are squealing or grinding, it’s time to replace the pads and rotors. This job is easy to do yourself, and it’s a great way to save money. In this blog post, we’ll show you how to change rear brake pads and rotors on a 2002 Chevy Suburban.
First, you’ll need to purchase the correct parts for your vehicle. You can find these at any auto parts store, or online. Next, you’ll need to remove the old pads and rotors. To do this, you’ll need to remove the caliper bolts and the caliper itself. Once the caliper is off, you can remove the old pads and rotors. Finally, you’ll need to install the new pads and rotors. To do this, simply reverse the process you used to remove the old ones. That’s all there is to it!
Can I change my own brake pads and rotors?
Yes, you can change your own brake pads and rotors. You will need a few tools, including a socket wrench, to remove the old brake pads and rotors. You will also need to purchase new brake pads and rotors. Once you have everything you need, follow these steps:
How long does it take to change rear brake pads and rotors?
It takes about an hour to change rear brake pads and rotors. This includes taking off the old brake pads and rotors, cleaning the brake calipers and brake pads, and then installing the new brake pads and rotors.
What tools do you need to change rear brake pads?
In order to change rear brake pads, you need a few tools. You will need a socket wrench with the proper size socket to fit the bolts on your brake pads. You will also need a C-clamp or a brake piston tool to push the brake piston back into the caliper. You may also need a hammer to tap the old brake pads out of the caliper. Finally, you will need new brake pads and brake pad grease.
How much does it cost to replace brakes on a suburban?
There is no definitive answer to this question as the cost of replacing brakes on a suburban can vary greatly depending on the make and model of the vehicle, as well as the specific type of brakes that need to be replaced. However, a rough estimate for the cost of replacing brakes on a suburban would be between $200 and $400.
What tools are needed to change brakes and rotors?
The tools needed to change brakes and rotors are: a wrench, a socket set, a screwdriver, a hammer, and a chisel.
Do you need to bleed brakes when changing pads?
It is not necessary to bleed the brakes when changing the brake pads. However, if the brake pads are worn down to the point where the metal backing plate is exposed, the backing plate can contact the brake rotor and cause damage. In this case, it is necessary to bleed the brakes to remove any air from the brake lines and prevent damage to the brake system.
Is it hard to change brakes and rotors?
It depends on the vehicle. Some brakes and rotors are easy to change, while others are more difficult. It also depends on the person changing them – some people find it easier than others.
How much does it cost to have your brakes and rotors replaced?
The cost of having your brakes and rotors replaced can vary depending on the make and model of your vehicle, as well as the quality of the parts used. Generally speaking, you can expect to pay between $200 and $700 for the parts and labor involved in this repair.
Should you replace front and rear brakes at the same time?
There is no definitive answer to this question, as it depends on a number of factors such as the condition of your brakes, how often you use your car, and your driving habits. However, most experts generally recommend replacing both front and rear brakes at the same time, as this will ensure that your brakes are evenly balanced and will not cause any problems.
Do you need a caliper tool to change brakes?
No, a caliper tool is not needed to change brakes.
Can you change brake discs yourself?
Yes, you can change brake discs yourself with the right tools and knowledge. First, you need to know what kind of brake discs your car has. There are two main types of brake discs: solid and vented. Solid brake discs are made from one solid piece of metal, while vented brake discs have a series of small holes drilled into them to help dissipate heat. Once you know what type of brake discs you have, you need to gather the right tools. For solid brake discs, you will need a disc brake caliper tool and a brake disc retaining tool. For vented brake discs, you will need a disc brake caliper tool, a brake disc retaining tool, and a drill.
How do I know when my rotors are bad?
There are several ways to tell if your rotors are bad. One way is to look at them. If they are warped or have grooves in them, they need to be replaced. Another way to tell is by the way your car drives. If your car vibrates when you brake, or if it takes longer to stop than it used to, your rotors may be bad.
How long do suburban brakes last?
There is no definitive answer to this question as it depends on a number of factors, such as the type of suburban, the driving conditions, and the maintenance schedule. However, on average, suburban brakes should last between 30,000 and 70,000 miles.
How do you compress a rear brake caliper without tool?
There are a few ways to compress a rear brake caliper without a tool. One way is to use a C-clamp or another type of clamp to compress the piston back into the caliper. Another way is to use a brake bleeder kit to bleed the brakes and push the piston back into the caliper.
What happens if you don’t bleed your brakes after changing them?
If you don’t bleed your brakes after changing them, the brakes may feel spongy when you first depress the pedal. Additionally, you may not have full braking power, which could be dangerous.
Do you pump brakes after adding brake fluid?
No, you should not pump the brakes after adding brake fluid.
Will brakes eventually bleed themselves?
No, they will not. Brakes need to be bled periodically to remove air from the lines. Over time, air can enter the lines and cause the brakes to feel spongy.
What happens if you replace brake pads without turning the rotors?
If you replace brake pads without turning the rotors, the new brake pads will not make full contact with the rotors, which will prevent the brakes from working properly. Additionally, the old brake pads may still be stuck to the rotors, which can cause the brakes to squeal or grind when they are applied.
Do you have to replace brake pads and discs at the same time?
There is no definitive answer, as it depends on the condition of your brake pads and discs. If your brake pads are still in good condition, then you may only need to replace your discs. However, if your brake pads are worn down, then you will need to replace both your brake pads and discs.
Why my car shakes when I brake at high speed?
There are a few reasons why your car may shake when you brake at high speed. One reason could be that your brake pads are worn and need to be replaced. Another reason could be that your brake rotors are warped and need to be replaced. Finally, your car may be shaking because your brake calipers are sticking and need to be replaced.