How To Change Rear Brake Pads On 2004 Cadillac Srx
We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If you’re noticing that your Cadillac SRX is taking longer to stop than it used to, or if you’re hearing an unusual noise when you brake, it might be time to change your rear brake pads. In this blog post, we’ll show you how to change the rear brake pads on a 2004 Cadillac SRX.
If you’re noticing any of these issues with your Cadillac SRX, bring it into the nearest service center so that one of our certified technicians can take a look.
How do you change brakes on a Cadillac SRX?
Changing the brakes on a Cadillac SRX is a pretty simple process. You will need to jack up the car, remove the wheels, and then remove the brake pads. To remove the brake pads, you will need to unscrew the retaining pin and then pull the pads out. Once the pads are out, you can put new ones in and screw the retaining pin back in. Then, you can put the wheels back on and lower the car.
How do you change rear brake pads?
If you have disc brakes, the process is as follows:
How do you change the rear brakes on a 2004 Cadillac Deville?
The rear brakes on a 2004 Cadillac Deville can be changed by removing the wheels, removing the brake calipers, removing the brake pads, and then cleaning and lubricating the brake calipers and brake pads.
How much do brakes cost for a Cadillac SRX?
The cost of brakes for a Cadillac SRX can vary depending on the type of brakes and the size of the vehicle. The average cost for a set of brakes can range from $200 to $500.
How do you change brake pads and rotors on a Cadillac SRX?
The process of changing brake pads and rotors on a Cadillac SRX is as follows:
What is brake caliper grease?
Brake caliper grease is a lubricant that is used to protect the moving parts of a brake caliper from corrosion and wear. The grease helps to keep the caliper operating smoothly and reduces the amount of friction between the moving parts.
Can I change brake pads myself?
It is possible to change brake pads yourself, but it is not recommended unless you have experience with auto maintenance. If you are not comfortable working on your car, it is best to take it to a mechanic.
Is it hard to change rear brakes?
It is not hard to change rear brakes. However, it is important to know what type of brakes your vehicle has before starting the project. There are two types of brakes – disc brakes and drum brakes. Disc brakes are the most common type of brakes and are typically found on newer vehicles. Drum brakes are typically found on older vehicles. Each type of brake has a different process for changing the brakes.
How long does it take to change rear brake pads?
It takes about an hour to change rear brake pads. This includes removal of the old pads, cleaning the brake caliper and rotor, and installing the new pads.
How do you remove rotors?
The first step is to loosen the lug nuts on the wheel. Once the lug nuts are loose, you can remove the wheel. With the wheel removed, you will be able to see the rotor. There are two bolts that hold the rotor to the hub. These bolts must be removed in order to take the rotor off. Once the bolts are removed, the rotor can be taken off by hand.
How long should brakes last on Cadillac SRX?
There is no definitive answer, as brakes can last anywhere from 30,000 to 70,000 miles depending on driving habits and conditions. However, it is generally recommended that brakes be replaced every 50,000 miles to ensure optimal performance and safety.
Where do you spray brake cleaner?
You should always consult your car’s owner’s manual before using brake cleaner, but in general, you should apply brake cleaner to any brake parts that are dirty or corroded. This includes the brake pads, brake discs, brake calipers, and brake drums.
Are you supposed to grease brake pads?
It is not necessary to grease brake pads.
Should you grease caliper pins?
Caliper pins are the small metal pins that hold the caliper halves together. Greasing these pins can help to prevent corrosion and make it easier to remove the caliper halves when necessary.
Can you change brake pads without taking wheel off?
In short, no. In order to change brake pads, the wheel must be removed so that the caliper can be accessed. The caliper is what holds the brake pads in place, so it must be unbolted in order to swap out the old pads for new ones.
Do you need to bleed brakes when changing pads?
It is not necessary to bleed the brakes when changing the brake pads. However, if the brake pads are worn down to the point where the metal backing plate is exposed, the backing plate can contact the brake rotor and cause damage. In this case, it is necessary to bleed the brakes to remove any air from the brake lines and prevent damage to the brake system.
What tools do I need to change my brake pads?
To change your brake pads, you need: a jack, a jack stand, a lug wrench, a c-clamp, a brake pad spreader, brake pads, and brake lubricant.
What happens if you replace brake pads without turning the rotors?
If you replace brake pads without turning the rotors, the new brake pads will not make full contact with the rotors, which will prevent the brakes from working properly. Additionally, the old brake pads may still be stuck to the rotors, which can cause the brakes to squeal or grind when they are applied.
How do you check rear brake pads?
There are a few ways to check your rear brake pads. One way is to remove the wheel and visually inspect the pads. Another way is to use a brake pad thickness gauge.
How much is a brake pad change at Walmart?
The cost of a brake pad change at Walmart will vary depending on the make and model of your vehicle. However, on average, you can expect to pay between $60 and $120 for the parts and labor.