We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If your back brakes are squealing or grinding, it may be time to replace the brake pads. This is a relatively easy process that you can do at home with a few tools.
You can purchase brake pads at most auto parts stores. Be sure to get pads that are specifically made for your vehicle. Once you have the pads, you will need to remove the old ones. This can be done by taking off the wheel and then removing the caliper.
How do you change the rear brakes on a 2008 Hyundai Elantra?
The rear brakes on a 2008 Hyundai Elantra can be changed by removing the wheel, removing the brake caliper, removing the brake pads, and then installing new brake pads and reassembling the brake caliper and wheel.
How do you change rear brake pads on a Hyundai?
If your Hyundai has rear disc brakes, the process for changing the brake pads is similar to changing the front brake pads. You will need a jack and jack stands to support the vehicle, as well as a lugnut wrench and a crescent wrench. You will also need to remove the wheels to access the brake calipers.
Does a Hyundai Elantra have rear brakes?
Yes, the Hyundai Elantra has rear brakes.
How do you change back brake pads?
Brake pads are a wear item on your vehicle, and will eventually need to be replaced. Most automakers have a service interval for brake pad replacement, typically around 50,000 miles. When it’s time to replace your brake pads, you will need to purchase new pads and have them installed by a qualified mechanic.
How do you remove the rear brake rotor?
Removal of the rear brake rotor can be accomplished by following these steps:
How much do new brakes cost Hyundai Elantra?
The average cost of new brakes for a Hyundai Elantra is $300-$400.
How do you change the rear brakes on a 2011 Hyundai Elantra?
The first thing you need to do is loosen the lug nuts on the rear wheels. Once they are loose, you can jack up the car and remove the rear wheels. Then, you will need to remove the brake caliper by unbolting it from the suspension. Once the caliper is off, you can remove the brake pads and replace them with new ones. Finally, you can bolt the caliper back into place and lower the car back down to the ground. Be sure to tighten the lug nuts back down before you drive the car.
How do you change the brakes on a 2013 Hyundai Elantra?
There are a few different ways to change the brakes on a 2013 Hyundai Elantra, depending on what type of brakes you have. If you have disc brakes, you will need to remove the wheel, caliper, and rotor. If you have drum brakes, you will need to remove the wheel and drum.
How do you change the brakes on a 2014 Hyundai Accent?
The first thing you need to do is loosen the lug nuts on the wheel. Then, you need to jack up the car and remove the wheel. After that, you need to remove the brake caliper. The brake caliper is held on by two bolts, and you will need a wrench to remove them. Once the brake caliper is off, you need to remove the brake pads. There are usually two brake pads, an inner and an outer. The inner brake pad is held on by a pin, and the outer brake pad is held on by a clip. You will need a hammer to remove the pin. Once the brake pads are off, you can put the new ones on. Make sure to put the inner brake pad on first, and then the outer brake pad. You will need to put the brake caliper back on, and then you can put the wheel back on. Finally, you need to tighten the lug nuts.
How long do Hyundai Elantra brake pads last?
Brake pads typically last between 20,000 and 40,000 miles, but this can vary depending on driving habits and conditions.
Does Hyundai Elantra have disc brakes?
Yes, the Hyundai Elantra has disc brakes. The front brakes are 12.0 inches in diameter and the rear brakes are 11.0 inches in diameter.
How much should it cost to replace brake pads and rotors?
The cost of replacing brake pads and rotors depends on the make and model of the vehicle, as well as the quality of the parts. Generally, brake pads will cost between $30 and $100 per set, while rotors will cost between $25 and $50 each.
Can I replace brake pads myself?
Yes, you can replace brake pads yourself. You will need to purchase a brake pad replacement kit, which will include new brake pads and any necessary hardware. You will also need a few tools, including a jack and jack stands, a lug wrench, a caliper piston tool, and a C-clamp. You will need to disconnect the old brake pads and clean the caliper housing before installing the new pads. Once the new pads are in place, you will need to bleed the brakes to remove any air from the system.
Can you replace just rear brakes?
In most cases, yes. However, it is always best to consult your car’s owner’s manual or a professional mechanic to be sure.
Is it hard to change rear brakes?
It is not hard to change rear brakes. However, it is important to know what type of brakes your vehicle has before starting the project. There are two types of brakes – disc brakes and drum brakes. Disc brakes are the most common type of brakes and are typically found on newer vehicles. Drum brakes are typically found on older vehicles. Each type of brake has a different process for changing the brakes.
How long does it take to replace rear brakes and rotors?
The time it takes to replace rear brakes and rotors can vary depending on the make and model of the vehicle. It typically takes around an hour to an hour and a half to complete the job.
How do you know when to replace rear rotors?
There are a few signs that will indicate it is time to replace your rear rotors. If your vehicle is vibrating when braking, this is usually a sign that the rotors are warped and need to be replaced. If you hear a squealing noise when braking, this is also an indication that the rotors need to be replaced. Finally, if you notice that your brakes are not working as effectively as they used to, it is probably time to replace the rotors.
What’s the difference between front and rear brake pads?
The main difference between front and rear brake pads is that front brake pads are usually larger and thicker than rear brake pads. This is because the front brakes do most of the work when stopping a vehicle. Rear brake pads are typically smaller and thinner than front brake pads because the rear brakes provide less stopping power than the front brakes.
How much does Hyundai charge for a brake job?
Hyundai charges around $200 for a basic brake job. This includes new brake pads and resurfacing the rotors. More extensive brake jobs that include new rotors or calipers can cost up to $1000.
How long does it usually take to get brakes fixed?
The amount of time it takes to fix brakes can vary depending on the severity of the damage and the make and model of the vehicle. However, on average, it should take about an hour to fix brakes.